pub struct NodeExecutorHandle { /* private fields */ }Implementations§
Source§impl NodeExecutorHandle
impl NodeExecutorHandle
Sourcepub async fn seal_block(&self, tx_batch: TxBatch) -> Result<()>
pub async fn seal_block(&self, tx_batch: TxBatch) -> Result<()>
Request NodeExecutor to seal a new block from the provided transaction batch. Does not
wait for the block to actually be produced.
It is sender’s responsibility to make sure TxBatch is constructed correctly (see its
docs).
Sourcepub async fn seal_block_sync(&self, tx_batch: TxBatch) -> Result<L2BlockNumber>
pub async fn seal_block_sync(&self, tx_batch: TxBatch) -> Result<L2BlockNumber>
Request NodeExecutor to seal a new block from the provided transaction batch. Waits for
the block to be produced and returns its number.
It is sender’s responsibility to make sure TxBatch is constructed correctly (see its
docs).
Sourcepub async fn seal_blocks_sync(
&self,
tx_batches: Vec<TxBatch>,
interval: u64,
) -> Result<Vec<L2BlockNumber>>
pub async fn seal_blocks_sync( &self, tx_batches: Vec<TxBatch>, interval: u64, ) -> Result<Vec<L2BlockNumber>>
Request NodeExecutor to seal multiple blocks from the provided transaction batches with
interval seconds in-between of two consecutive blocks.
Waits for the blocks to be produced and returns their numbers.
Guarantees that the resulting block numbers will be sequential (i.e. no other blocks can be produced in-between).
It is sender’s responsibility to make sure TxBatches are constructed correctly (see
docs).
Sourcepub async fn set_code_sync(
&self,
address: Address,
bytecode: Vec<u8>,
) -> Result<()>
pub async fn set_code_sync( &self, address: Address, bytecode: Vec<u8>, ) -> Result<()>
Request NodeExecutor to set bytecode for given address. Waits for the change to take place.
Sourcepub async fn set_storage_sync(&self, key: StorageKey, value: U256) -> Result<()>
pub async fn set_storage_sync(&self, key: StorageKey, value: U256) -> Result<()>
Request NodeExecutor to set storage key-value pair. Waits for the change to take place.
Sourcepub async fn set_balance_sync(
&self,
address: Address,
balance: U256,
) -> Result<()>
pub async fn set_balance_sync( &self, address: Address, balance: U256, ) -> Result<()>
Request NodeExecutor to set account’s balance to the given value. Waits for the change
to take place.
Sourcepub async fn set_nonce_sync(&self, address: Address, nonce: U256) -> Result<()>
pub async fn set_nonce_sync(&self, address: Address, nonce: U256) -> Result<()>
Request NodeExecutor to set account’s nonce to the given value. Waits for the change
to take place.
Sourcepub async fn reset_fork_sync(
&self,
url: Url,
block_number: Option<L2BlockNumber>,
) -> Result<()>
pub async fn reset_fork_sync( &self, url: Url, block_number: Option<L2BlockNumber>, ) -> Result<()>
Request NodeExecutor to reset fork to given url and block number. All local state will
be wiped. Waits for the change to take place.
Sourcepub async fn reset_fork_block_number_sync(
&self,
block_number: L2BlockNumber,
) -> Result<()>
pub async fn reset_fork_block_number_sync( &self, block_number: L2BlockNumber, ) -> Result<()>
Request NodeExecutor to reset fork at the given block number. All state will be wiped.
Fails if there is no existing fork. Waits for the change to take place.
Sourcepub async fn set_fork_url_sync(&self, url: Url) -> Result<Option<Url>>
pub async fn set_fork_url_sync(&self, url: Url) -> Result<Option<Url>>
Request NodeExecutor to set fork’s RPC URL without resetting the state. Waits for the
change to take place. Returns Some(previous_url) if fork existed and None otherwise.
Sourcepub async fn remove_fork_sync(&self) -> Result<()>
pub async fn remove_fork_sync(&self) -> Result<()>
Request NodeExecutor to remove fork if there is one. Waits for the change to take place.
Sourcepub async fn increase_time_sync(&self, delta: u64) -> Result<()>
pub async fn increase_time_sync(&self, delta: u64) -> Result<()>
Request NodeExecutor to increase time by the given delta (in seconds). Waits for the
change to take place.
Sourcepub async fn enforce_next_timestamp_sync(&self, timestamp: u64) -> Result<()>
pub async fn enforce_next_timestamp_sync(&self, timestamp: u64) -> Result<()>
Request NodeExecutor to enforce next block’s timestamp (in seconds). Waits for the
timestamp validity to be confirmed. Block might still not be produced by then.
Sourcepub async fn set_current_timestamp_sync(&self, timestamp: u64) -> Result<i128>
pub async fn set_current_timestamp_sync(&self, timestamp: u64) -> Result<i128>
Request NodeExecutor to set current timestamp (in seconds). Waits for the
change to take place.
Sourcepub async fn set_block_timestamp_interval(&self, seconds: u64) -> Result<()>
pub async fn set_block_timestamp_interval(&self, seconds: u64) -> Result<()>
Request NodeExecutor to set block timestamp interval (in seconds). Does not wait for the
change to take place.
Sourcepub async fn remove_block_timestamp_interval_sync(&self) -> Result<bool>
pub async fn remove_block_timestamp_interval_sync(&self) -> Result<bool>
Request NodeExecutor to remove block timestamp interval. Waits for the change to take
place. Returns true if an existing interval was removed, false otherwise.
Sourcepub async fn enforce_next_base_fee_per_gas_sync(
&self,
base_fee: U256,
) -> Result<()>
pub async fn enforce_next_base_fee_per_gas_sync( &self, base_fee: U256, ) -> Result<()>
Request NodeExecutor to enforce next block’s base fee per gas. Waits for the change to take
place. Block might still not be produced by then.
Trait Implementations§
Source§impl Clone for NodeExecutorHandle
impl Clone for NodeExecutorHandle
Source§fn clone(&self) -> NodeExecutorHandle
fn clone(&self) -> NodeExecutorHandle
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for NodeExecutorHandle
impl RefUnwindSafe for NodeExecutorHandle
impl Send for NodeExecutorHandle
impl Sync for NodeExecutorHandle
impl Unpin for NodeExecutorHandle
impl UnwindSafe for NodeExecutorHandle
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
§impl<T> Conv for T
impl<T> Conv for T
§impl<T> FmtForward for T
impl<T> FmtForward for T
§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
self to use its Binary implementation when Debug-formatted.§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
self to use its Display implementation when
Debug-formatted.§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
self to use its LowerExp implementation when
Debug-formatted.§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
self to use its LowerHex implementation when
Debug-formatted.§fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
self to use its Octal implementation when Debug-formatted.§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
self to use its Pointer implementation when
Debug-formatted.§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
self to use its UpperExp implementation when
Debug-formatted.§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
self to use its UpperHex implementation when
Debug-formatted.§fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
§impl<T> Instrument for T
impl<T> Instrument for T
§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read more§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling [Attribute] value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi [Quirk] value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the [Condition] value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere
T: ?Sized,
§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
self and passes that borrow into the pipe function. Read more§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
self and passes that borrow into the pipe function. Read more§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R,
) -> R
fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
self, then passes self.as_ref() into the pipe function.§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
self, then passes self.as_mut() into the pipe
function.§fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
self, then passes self.deref() into the pipe function.§impl<T> Pointable for T
impl<T> Pointable for T
§impl<T> Tap for T
impl<T> Tap for T
§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
Borrow<B> of a value. Read more§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
BorrowMut<B> of a value. Read more§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
AsRef<R> view of a value. Read more§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
AsMut<R> view of a value. Read more§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
Deref::Target of a value. Read more§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
Deref::Target of a value. Read more§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
.tap() only in debug builds, and is erased in release builds.§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
.tap_mut() only in debug builds, and is erased in release
builds.§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
.tap_borrow() only in debug builds, and is erased in release
builds.§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
.tap_borrow_mut() only in debug builds, and is erased in release
builds.§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
.tap_ref() only in debug builds, and is erased in release
builds.§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
.tap_ref_mut() only in debug builds, and is erased in release
builds.§fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
.tap_deref() only in debug builds, and is erased in release
builds.